Tensilathe/505   

         Tensilathe/505 is a specialized, precision heavy duty tracing lathe capable of turning bars up to 18” in length.  The lathe bed is precision ground, cast iron, ensuring smooth movement of the tailstock and tracer.  The Tensilathe/505 is powered by a 1HP motor, with infinitely variable speed from 100 to 1725 RPM.  A maximum spindle speed of 3000RPM can be achieved by changing pulley ratios.

             The compact, hydraulic tracer operates on a valve independent of other functions, ensuring precise, instant response.   Tracing and cutting of the specimen can be accomplished during forward and reverse travel.  The tool holder mounted on the Tensilathe/505 uses standard disposable carbide inserts with or without chip breaker.   A 3-jaw universal chuck is supplied with the unit; a 4-jaw, independent precision chuck is also available.

Precision master templates are accurately aligned and clamped independently above the hydraulic tracer to control the configuration of the test specimens.  Straight templates can be used to rough bars from irregular stock, while contoured templates provide the proper dimensions and taper for machining the gauge section and shoulders.  Standard master templates for the most commonly used samples are available; custom templates can be manufactured for virtually any specification needed.

LATHE SPECIFICATIONS:

Electrical Requirements: 115V/1 Phase, 60Hz

Motor Size: 1HP

Motor Speed: 100RPM to 1725RPM, Infinitely Variable

Spindle Speed: 0 to 3000RPM, Infinitely Variable

Hydraulic Pump: 1/3 HP, 115V; 5 gallon Hydraulic Fluid Reservoir

Coolant: Misting System; 1Liter Reservoir

Air Requirements: 70-100PSI, 2CFM

Dimensions: 50”x30”x50”H

Weight: 700 Lbs. Net

Included in Purchase Price:

• Tracing Head
• Drill Chuck with Arbor
• Live Center
• Mist Coolant System (Installed)
• Tool Holder (Installed)
• Carbide Inserts (Package of 5)