TENSILKUT MASTER TEMPLATES
Tensilkut master templates are made to produce samples in accordance with the most commonly used ASTM specifications for a wide variety of materials and tests. The template you need is determined by the specification of your test sample and the model of your Tensilkut, Tensilkut II or Tensilgrind machine.
The chart below indicates specifications which are on the shelf; for a quotation on the template for your machine, please click here.
|
Specification |
Gauge |
|---|---|
|
ASTM E8 Tensile sample |
.500” x 2” |
|
ASTM E8 Micro Tensile sample |
.250” x 1” |
|
ASTM E8 Micro Tensile (modified) |
.250” x 2” |
|
ASTM D638 Type I Tensile |
.500” x 2” |
|
ASTM D638 Type II Tensile |
.250” x 2” |
|
ASTM D638 Type III Tensile |
.750” x 2.25” |
|
ASTM D1822 Tension Impact, Type S |
.500” R x .125” |
|
ASTM D1822 Tension Impact, Type L |
.375” x .125” |
|
ASTM D790 Flexural (straight) bar |
.500” width x 4” - 8” length |
|
ASTM D790 Flexural (straight) bar |
1.000” width x 4” - 8” length |
|
ASTM D695 Compression: to cut gauge section |
.500” x 1.5” |
|
ASTM D695 Compression: to square ends |
3.13” |
|
ASTM D412 Die C |
.250” x 2.32” |
|
ASTM D412 Die D |
.125” x 1.31” |
For a quotation on a template for a specification not listed here, please contact us with your specification, or send us a sketch of your finished sample.
For information on Tensilbits for the 10-10 series Tensilkut I, click here. For Tensilbits for all other Tensilkut I machines, click here. For a listing of Tensilbits for all Tensilkut II models, click here. We accept credit cards for Master Template and Tensilbit orders.
|
Home | About Us | Our Products | Contact Us | |
||
|
All concontents copyright © 1998 & 2004 Sieburg International, Inc. All rights reserved |
||