|
Equipment for accurate preparation of tensile specimens |
|
Tensilkut Engineering |
|
CNC Tensilkut III is used for cutting flat test samples from strips and plaques. Operating on the Windows platform, the system is user friendly and easily learned. |
Product Summary |
|
The CNC Tensilkut III was developed for use by lab personnel without previous machining experience. It employs an integral IBM compatible computer with hard drive, 101 key enhanced keyboard and mouse to prepare those specimens which we have programmed in accordance with the customer's requirements. A chip shield surrounds the entire working area of the machine, inhibiting flying chips and lessening the noise of the cutting operation. An emergency stop switch is mounted on the front of the machine, as are all power switches. The unit contains a vacuum chip removal system and a micro drop coolant system for improved edge finishes. This system features a Windows-based software featuring pull down menus for easy use; the color monitor displays tool paths, speeds and depths of cut during operation. Programs for ASTM, ASM, JIS, DIN and other standards as required by the user are installed in the computer, and accessed via the pull-down menus. Optional software will allow specimen contours to be imported from most CAD drawing programs.
SPECIFICATIONS: 115V, 1PH, 3HP Motor With Infinitely Variable Motor Speed Regulator Vacuum Chip Reduction System Micro Drop Coolant System Front Opening Chip Shield Surrounds Working Area 60-80 PSI Clean, Dry Shop Air Required Pentium Computer with CD, floppy and Hard Drives, Keyboard, Monitor and Mouse Windows and TensilMaster Pro Operating Softwares installed 115V Electrical line with Uninterruptible Power Source for computer system required Dimensions: 72”x36”x60”; Weight: 1100 lbs.
PROGRAMMING
Tensilkut Engineering can write programs for any specimen the customer desires. The following information is required: Starting Piece Finished Specimen Material Drawing of each finished specimen Dimensions of starting blank or plaque Length and Width of Gauge section Starting Shape Radius at shoulders, tapers and tolerances Typical starting pieces can be sent to us English or Metric Dimensions
CUTTERS:
For more information on the cutters available for use with the CNC Tensilkut III, click here. |
|
CNC Tensilkut III |
|
To contact us: |
