|
Equipment for accurate preparation of tensile specimens |
|
Tensilkut Engineering |
|
CUTTERS FOR CNC TENSILKUT III |
|
Specially designed cutters maximize your utilization of the CNC Tensilkut III. |
|
For accurate cutting with the CNC Tensilkut III, use the Solid Carbide C60 series Tensilbits, designed with an end cut. The list below suggests the proper cutter for your application: C-62 is a 2 flute, solid carbide cutter. It is suited to preparing most metal samples, including steel, copper, brass, and aluminum. It can also be used to cut soft plastics.
C-63 is a 4 flute, solid carbide cutter. It can be used for aluminum and other soft metals, and for hard plastics.
C-64 is an 8 flute, solid carbide cutter. It is well suited to preparing test samples from most plastics.
C-65 is a solid carbide, burr type cutter. It can be used for cutting specimens from ceramics, fiberglass, rubber, composites, epoxies and Kevlar*.
C-66 is a diamond plated, straight tool steel shanked cutter. It is used for finishing specimens which need special polishing around the edges, including Kevlar*.
C-67 is a solid carbide, high helix cutter. It is well suited to cutting specimens from most hard metals, including stainless and many alloys. It is also available with a Titanium Nitride coating, for longer life or better performance on harder metals (part no. TC-67). |
|
C-62, C-63, C-64, C-65, C-67 and TC-67 cutters for the CNC Tensilkut III. |
|
To contact us: |
