C-62, C-63, C-64, C-65, C-66, and TC-67 Cutters shown.

For accurate cutting with the CNC Tensilkut III, use the Solid Carbide C60 series Tensilbits, designed with an end cut. The list below suggests the proper cutter for your application:

C-62 is a 2 flute, solid carbide cutter. It is suited to preparing most metal samples, including steel, copper, brass, and aluminum. It can also be used to cut soft plastics.

C-63 is a 4 flute, solid carbide cutter. It can be used for aluminum and other soft metals, and for hard plastics.

C-64 is an 8 flute, solid carbide cutter. It is well suited to preparing test samples from most plastics.

C-65  is a solid carbide, burr type cutter. It can be used for cutting specimens from ceramics, fiberglass, rubber, composites, epoxies and Kevlar*.

C-66 is a diamond plated, straight tool steel shanked cutter. It is used for finishing specimens which need special polishing around the edges, including Kevlar*.

C-67 is a solid carbide, high helix cutter. It is well suited to cutting specimens from most hard metals, including stainless and many alloys. It is also available with a Titanium Nitride coating, for longer life or better performance on harder metals (part no. TC-67).