CNC Tensilkut III is used for cutting flat test samples from strips and plaques.  Operating on the Windows platform, the system is user friendly and easily learned.

 


 

CNC TENSILKUT III
 

            The CNC Tensilkut III was developed for use by lab personnel without previous machining experience.  It employs an integral IBM compatible computer with hard drive, 101 key enhanced keyboard and mouse to prepare those specimens which we have programmed in accordance with the customer's requirements. A chip shield surrounds the entire working area of the machine, inhibiting flying chips and lessening the noise of the cutting operation. An emergency stop switch is mounted on the front of the machine, as are all power switches. The unit contains a vacuum chip removal system and a micro drop coolant system for improved edge finishes. This system features a Windows-based software featuring pull down menus for easy use; the color monitor displays tool paths, speeds and depths of cut during operation. Programs for ASTM, ASM, JIS, DIN and other standards as required by the user are installed in the computer, and accessed via the pull-down menus. Optional software will allow specimen contours to be imported from most CAD drawing programs.

SPECIFICATIONS:

115V, 1PH, 3HP Motor With Infinitely Variable Motor Speed Regulator

Vacuum Chip Reduction System

Micro Drop Coolant System

Front Opening Chip Shield Surrounds Working Area

60-80 PSI Clean, Dry Shop Air Required

Pentium Computer with CD and Hard Drives,

Keyboard, Monitor and Mouse

Windows and TensilMaster Pro Operating Softwares installed

115V Electrical line with Uninterruptible Power Source for computer system required; 115V line on separate circuit required for the machine.

Dimensions: 72”x36”x60”; Weight: 1100 lbs.

 

PROGRAMMING

 

             Tensilkut Engineering can write programs for any specimen the customer desires.  The following information is required:


 Starting Piece
 Finished Specimen
 Material Drawing of each finished specimen
 Dimensions of starting blank or plaque
 Length and Width of gauge section
 Starting Shape
 Radius at shoulders; tapers and tolerances


Typical starting pieces can be sent to us.  English or Metric dimensions must be specified.


 

 

CUTTERS:

 

For more information on the cutters available for use with the CNC Tensilkut III, click here

To Contact us:

phone: (865) 982-6300

fax: (865) 982-6347

Email Us

Or visit our blog
 
 All products are manufactured in Maryville, Tennessee, USA, under registered trademarks.  All rights reserved.
Copyright 2010.
  Site Map